Bender WorldwideSite Map

Home

Products

Services

About Us

Resources

Local Reps

Contact Us









Clocks, Timers, and Accessories


Need assistance in building the right Isolated Power solution? Try out our new Isolated Power Solution Builder.



Dual Display and 3/4 in LED char. Clock/Elapsed Timer (ZT1490)


Description:

  • UL recognized 
  • Overload protection with automatic reset
  • Microprocessor design with special quartz timing circuitry for ultimate stability and repeatability
  • No harness between PC boards, potential for maintenance at board level
  • Power outage backup for at least 24 hours, no batteries
  • Protected against HF interference and transient voltages
  • Code blue output 
  • Serial bus RS485, with a twisted pair shielded cable
  • Up to 32 Clock/Elapsed Timer (ZT1490/1491) and/or Surgical Chronometer (ZT1494) can be connected in a Master/Slave arrangement, via approximately 3200 feet of cable


Datasheet




Single 2.5 in. Display Clock/Elapsed Timer (ZT1491)


Description:

  • UL recognized 
  • Overload protection with automatic reset
  • Microprocessor design with special quartz timing circuitry for ultimate stability and repeatability
  • No harness between PC boards, potential for maintenance at board level
  • Power outage backup for at least 24 hours, no batteries
  • Protected against HF interference and transient voltages
  • Code blue output 
  • Serial bus RS485, with a twisted pair shielded cable
  • Up to 32 Clock/Elapsed Timer (ZT1490/1491) and/or Surgical Chronometer (ZT1494) can be connected in a Master/Slave arrangement, via approximately 3200 feet of cable


Datasheet




Surgical Chronometer (ZT1494)


Description:

  • No interference with medical equipment
  • Interfaces with all BENDER Clocks/Elapsed Timers, ZT1490 and ZT1491
  • Uses low voltage wiring (5V DC)
  • Mounts to standard electrical gang box
  • Connection is by screw terminal strip 
  • Easy to clean rugged stainless steel 


Datasheet




Clock / Elapsed Timer Remote Control (MK1450)


Description:

  • No interference with medical equipment
  • Interfaces with all BENDER Clocks/Elapsed Timers, ZT1490 and ZT14914
  • Uses low voltage wiring (5V DC)
  • Mounts to standard electrical gang box
  • Connection is by screw terminal strip 
  • Easy to clean rugged stainless steel 


Datasheet




Remote Control for Surgical Chronometer (MK1454-G4)


Description:

  • No interference with medical equipment
  • Interfaces with all BENDER Clocks/Elapsed Timers, ZT1490, ZT1491, and ZT1494
  • Uses low voltage wiring (5V DC)
  • Mounts to standard electrical gang box
  • Connection is by screw terminal strip 
  • Easy to clean rugged stainless steel 


Datasheet




700 Fox Chase - Coatesville PA 19320 USA    Fax: 610-383-7100
ISOTROL: 610-383-9655  BENDER Medical: 610-383-9200
To request more information, use our online form
or email us at: isotrol@bender.org