Communications Solutions for Standard Fieldbus Systems and Ethernet Networks
Protocol converters take data received from BENDER devices with a BMS bus output, and outputs information via varying commonly used protocols, such as Ethernet.
Compare up to three products side by side:
 |
|
FTC470XET |
 Ethernet gateway for various BENDER monitors
|
|
The protocol converter FTC470XET is designed to be used as Ethernet gateway with web server. It converts data from the BMS bus into TCP / IP protocol (Ethernet). In this way, data from BMS systems can be displayed on a personal computer via a web browser. Additional software installation is not required.
|
|
| |
|
 |
|
FTC470XMB |
Modbus gateway for various BENDER monitors
|
|
The protocol converter FTC470XMB is designed to transmit data from the BMS bus to the Modbus RTU and vice versa. In this way, information from communication-capable BENDER products, such as EDS, RCMS or MEDICS® systems can be integrated into a Modbus RTU system. Programming and adaptations on the PROFIBUS DP side have to be carried out by the user. In mode 1, up to 10 BMS-compatible BENDER devices can be displayed with one FTC470XMB.
|
|
| |
|
 |
|
FTC470XDP |
PROFIBUS gateway for various BENDER monitors
|
|
The protocol converter FTC470XDP is designed to transmit data from the BMS bus to the PROFIBUS DP and vice versa. In this way, information from communication-capable BENDER products, such as EDS, RCMS or MEDICS® systems can be integrated into a PROFIBUS DP system. Programming or adaptations on the PROFIBUS DP side have to be carried out by the user.
|
|
| |
|
|
 |
700 Fox Chase - Coatesville PA 19320 USA
Phone: 610-383-9200 / Fax: 610-383-7100 - Toll Free: 1-800-356-4266 |
 |
To request more information, use our online form
or email us at: info@bender.org |
| |